13 inch x 8.0 inch 4 Spoke Classic Race Wheel in Matt Black with diamond machine rim, to fit Brabham BT18
|P.C.D. Range||4 / 101.6|
|Offset (ET) Range||-13|
|Colour||Matt black HR|
|Nut / Bolt Type||4 Pin centre lock|
|Typical Vehicle Fitment||Brabham BT 18|
|Retail inc Vat||£176.00 ea.|
Wheels that are drilled from painted blanks will not be re-painted after drilling.
Some items are special order, a minimum order quantity of 100 pieces per fitment will be required.
Road wheels include centre cap & logo but exclude nuts or bolts.
All prices are in GBP£ and are ex-works, Ollerton, Nottinghamshire, NG22 9QW, UK.
Some wheels will require the use of sleeve or tuner nuts / bolts which will be supplied at an extra cost.
' C ' Dimension is measured from the inner most part of the wheel to the mounting face, if in doubt a schematic diagram is available.
' A ' Dimension is measured from the outer most part of the wheel to the mounting face, if in doubt a schematic diagram is available.
' X Factor ' is measured from the mounting face to the middle of the back of the spoke, if in doubt a schematic profile is available.
All weights & dimensions are approximate & may vary slightly.
HR = With diamond machined rim. AO = All over painted. PCD = Pitch Circle Diameter.